frame wanted

Post Reply
sector160
Posts: 31
Joined: Thu Jun 28, 2012 1:57 pm

frame wanted

Post by sector160 »

ca 150 frame needed miami fla.
[email protected]
Larzfromarz
Posts: 620
Joined: Tue Dec 20, 2011 7:47 pm

Post by Larzfromarz »

Do you mean a CA95? There is one in St.Pete... 4free!
sector160
Posts: 31
Joined: Thu Jun 28, 2012 1:57 pm

ca 150 frame

Post by sector160 »

I dont know if it is a ca 95 or ca 150 ..What is the dif.?..I have a complete rebuilt engine ,i had a frame but as things go i must have junked it years back [I do have a Fla title, it is for a 150] ill take a picture of the engine
then post later ..Thank you
Thats a ways North Could i see pictures to see chape
Thanks Again
Best regards ...lorenzo
sector160
Posts: 31
Joined: Thu Jun 28, 2012 1:57 pm

engine pics

Post by sector160 »

here are pictures of the engine ,the start # is CA95B..lorenzo
Attachments
002.jpg
001.jpg
sector160
Posts: 31
Joined: Thu Jun 28, 2012 1:57 pm

Post by sector160 »

CORECTION E not B
Smithers
Posts: 3175
Joined: Wed Feb 11, 2004 3:58 pm

Post by Smithers »

I would give it to you if you were close enough to pick it up. :D

Image
Larzfromarz
Posts: 620
Joined: Tue Dec 20, 2011 7:47 pm

Post by Larzfromarz »

Correct me if am wrong here guys-
CA95 has the 150cc engine and is called a Benly or possibly a Benly Touring, but is commonly referred to as the Baby Dream.
CA160 is essentially the same bike with much commonality to the CA95 but carries the 160cc engine. Also the CA160 is called the "Touring" and is easily confused with the Benly. I believe the CA160 had less production than the CA95 I could be way wrong.
You have a 150cc CA95 engine, looking decent I might add.
I have a black CA95 frame (ca95 5006963) a few thousand from yours. It's not as complete as Smithers' but whole lot closer.Pm if you want it.
sector160
Posts: 31
Joined: Thu Jun 28, 2012 1:57 pm

Post by sector160 »

Thanks Smithers ,but you are too far my friend .I aprichiate it
Lorenzo
sector160
Posts: 31
Joined: Thu Jun 28, 2012 1:57 pm

Post by sector160 »

still looking for a ca-95 frame ,I have a 150 engine , will need a title too ,the one I have I don't have the frame for...thank u larry
Post Reply