Page 1 of 1
New Project Bike
Posted: Fri Jul 11, 2014 6:49 pm
by Spokes
No Longer Available
Posted: Mon Jul 14, 2014 6:31 pm
by Spokes
No Longer Available
Posted: Sun Jul 20, 2014 4:28 pm
by ByTheLake
Good news - I like to learn of new projects. The VT700C should be a good platform for a project. How custom will you go?
Posted: Sun Jul 20, 2014 8:02 pm
by Spokes
No Longer Available
Posted: Mon Jul 21, 2014 3:44 pm
by ByTheLake
Needs an exhaust pipe too!
Posted: Mon Jul 28, 2014 3:15 pm
by Spokes
No Longer Available
Posted: Sun Sep 14, 2014 1:41 pm
by Spokes
No Longer Available
Posted: Sun Oct 05, 2014 4:50 pm
by Spokes
No Longer available
Posted: Sun Oct 12, 2014 5:36 am
by Spokes
No Longer Available
Posted: Mon Dec 22, 2014 3:28 pm
by Spokes
No Longer Available
Posted: Thu Dec 25, 2014 10:43 pm
by Smithers
So it's running right? These types of older bikes take a lot more work to get running than people think. You just have to assume all the seals are bad in the forks and the engine. Fuel pumps are always gummed up or dead and the brake salve and master cylinder seals could easily be too dry to work properly etc etc. new tires, seat and on and on and on. It can get painfully expensive but that's a great bike to work with. It has a slim profile and is lighter than the inline four bikes. Very neat. Only having two carbs is a plus!
Posted: Fri Dec 26, 2014 1:35 pm
by Spokes
No Longer Available