How do you get to these little parts? Well here is what I'm talking about. Here is the card of seals that I have used and here is the cover all taken apart as it is one of the last pieces that I need to paint. The adjuster is held in place by the foot with the long 10mm bolt which is resting just above the left corner of the cover. Once you remove this from the inside then the adjuster can then be pushed through the cover from the outside. Depending on if your clutch adjuster was ever greased, you will have to either press it through with your finger or tap it out with a small piece of wood (to protect the alloy) and a hammer.
And here we can see the inside of the cover and what it looks like when it's clean.
