Now for the dip! I slightly larger container might be nice. I eventually graduated to a glass jar so I could see better while dipping carbs. You don't want to leave them in the dip for more than 10 minutes without watching them very closely. This stuff is brutal. And they recommend that you mix the concentrate with water so read the directions closely. It's a good amount of water... like 2/3's or something and it's still gets right down to business when you put any parts in.
The thing is that it works too well and it will start to soften up the old carb alloys pretty quickly. So it you leave it in there for too long then when you remove the carb you will notice grey marks on your gloves and towels as you clean, rinse and dry it off. And when you go to scrape any residue off it will be very soft when you poke it.
