Four Wheel Forum

Do you still have bottom part of engine? I am looking for crank and rods. Doug

Hi there
Would really appreciate it if you would send one. Happy to pay you. Doug Bowers
8360 East Seneca Tnpk
Manlius, NY
13104

Great thread with tons of imformation! In doing one of these myself, I am searching for parts. Did I read somewhere that it was suggested to stay away from buying parts in Thailand? If so why? Also in taking my timing chain off the little springy clip that attaches the chains together flew away when ...

Thanks guys, this is begining to make sense! Any suggestions on where to look on Ebay for pistons,rings and gasket sets. Is there a web you fellows like?

Thanks for the suggestions. I can't seem to get the spark advancer free from the dynamo? I have taken the bolt out as you suggested,however nothing seems to free up at this time? Thank you for your help and patience.

How did you remove this magneto? I can not get mine to budge and I have asked this question a couple times and nothing seems to work. Did you pull it with a gear puller or some special tool? Thanks for the help.

I pulled my rear axel and the bolt was much bigger than the ac dynamo bolt. I thought you said to thread this in there and tap it counter clockwise to remove the ac dynamo rotor? Perhaps I don't need to remove this to split the engine and transmission so I can clean all the pieces from my broken ...

Are you talking about the ROTOR, the round thing that spins inside the coils?
If so, screw your back axle into it. Put a straight bar or screw driver through the hole in the end of the axle and give it a sharp knock anti clockwise, it should jump off with ease.

Sam. :)

Hi Sam
I believe we are ...

Thanks for the location of the serial #s, exactly where you said they would be. It helps knowing where to look! Great site!!!

I have my engine out of the bike,head is off and piston (one only as other broke from connecting rod) is showing. Because of the broken piston,I believe it will be necessary to seperate the engine so I can clean the pieces out off the bottom. I have taken both side covers off and the fields off ...

I also can't seem to locate the serial number on the frame? Found the one on the engine, but not the frame. Any suggestions where to look? Thanks .

Hello There
This is a wonderful site! So much imformation and help. I am restoring this bike and need to do an engine job. Where should I look for pistons, rings, gasket kit for whole engine,seals etc? Also, mine is red and I would like to have it repainted. Is this a mistake,and what is the color ...