|
The Honda CA95 / Benly 150 Restoration The little brother to the CA160 in our family of Hondas |
Thread Tools |
#1
|
|||
|
|||
CA 95 Aftermarket Custom 6 Volt Turn Signals
Here are a few examples of the "Spokes" method of building turn signals for your CA95. This method works on CA & CB models 6 or 12Volt.
The external mounted switch (left or right hand) A close up of a handlebar mounted signal The front View If you don't want to run the wires through the frame, you can make the rear fender brace a "conduit" This is a pic of a brace that is wired for signals and power for saddlebag lights. This is where the "winker" goes This is a pic of the rear signals mounted. These signals also mount with room for Buco Bag Mounts |
#2
|
|||
|
|||
looks great! i'm so used to using hand signals from not having them on the benly, i've taken to just doing it on all my bikes. you've made a nice solution.
|
#3
|
|||
|
|||
Using hand signals and working the clutch is NOT easy!
Spokes, shoot me a PM when you get a chance. |