Time Stamp 9-1-10
The bags are almost ready to be primed. These will be the last pics before the primer application.
This pic being held up to the light shows the mounting holes which were filled with fiberglass cloth and resin, now cured and sanded smooth. The holes will be re-drilled to accept the new mounting system.
Here is a shot of a repair, earlier shown as a blow through.
Here is a repair pic of one of the lids.
Finally the left bag with lid
The right bag with lid
Some more filling and sanding is in order. After every inch of surface is detail sanded, the bags will be primed with a 2 part primer. Once primed we will discuss priming and painting that will apply to fiberglass or metal