hmm,
A little disappointing that I have low compression after the re-bore. Might be best to take her apart again and make sure everything is lined up as it should. Maybe a good project over Christmas break.
After I had it re bored I was a little overwhelmed so I hired the machine shop that did the re-bore to put the motor back together for me. They seemed like capable dudes.
I did check the Tappet gaps and they all seem OK. I think I definitely have some sort of problem in the left cylinder because the exhaust is always much cooler than the right and also is much more oily/wet at the end of the pipe.
Anyways, I'll sort of play it by ear I guess. I'll update any findings I might have as I go forward.
Thank You
|