Thread
:
Kick Starter Failure
View Single Post
#
4
04-06-2014, 06:08 AM
ByTheLake
Senior Member
Join Date: Oct 2011
Location: Alden, MI USA
Posts: 730
I've taken the path of applying JB Weld High Temp to the kick starter ratchet pawl. I cleaned the hole with a solvent to remove oil, so this should stay in place. I suspect that this fix will keep the spring from bouncing out of place again.
ByTheLake
View Public Profile
Send a private message to ByTheLake
Find all posts by ByTheLake