[Noobens]

Originally Posted by Sam Green

If you use the rear wheel spindle as a puller, it comes off in less than 30 seconds.
Another thing to watch on re-assembly, looking from behind the motor, the head nut on the right of the row nearest you is a dome nut, the oil feed to the cam is under it.

Sam.

Is this the only one that needs to be domed? I think most of mine were domed, but I've ditched the dome because of some issues with re-installing the studs (they kept wanting to strip, so I tapped them and used locktite to hold them securely. They still torque down properly, but I'm using regular nuts to keep the rocker cap on. Is there an issue with oil pressure on that one particular stud causing leaks?