PDA

View Full Version : frame wanted


sector160
07-10-2012, 03:40 PM
ca 150 frame needed miami fla.
[email protected]

Larzfromarz
07-11-2012, 05:12 AM
Do you mean a CA95? There is one in St.Pete... 4free!

sector160
07-12-2012, 03:33 PM
I dont know if it is a ca 95 or ca 150 ..What is the dif.?..I have a complete rebuilt engine ,i had a frame but as things go i must have junked it years back [I do have a Fla title, it is for a 150] ill take a picture of the engine
then post later ..Thank you
Thats a ways North Could i see pictures to see chape
Thanks Again
Best regards ...lorenzo

sector160
07-12-2012, 05:08 PM
here are pictures of the engine ,the start # is CA95B..lorenzo

sector160
07-12-2012, 05:10 PM
CORECTION E not B

Smithers
07-12-2012, 06:59 PM
I would give it to you if you were close enough to pick it up. :D

http://www.fourwheelperformance.com/honda/ca95_partsbike_00.jpg

Larzfromarz
07-13-2012, 05:18 AM
Correct me if am wrong here guys-
CA95 has the 150cc engine and is called a Benly or possibly a Benly Touring, but is commonly referred to as the Baby Dream.
CA160 is essentially the same bike with much commonality to the CA95 but carries the 160cc engine. Also the CA160 is called the "Touring" and is easily confused with the Benly. I believe the CA160 had less production than the CA95 I could be way wrong.
You have a 150cc CA95 engine, looking decent I might add.
I have a black CA95 frame (ca95 5006963) a few thousand from yours. It's not as complete as Smithers' but whole lot closer.Pm if you want it.

sector160
07-14-2012, 02:18 PM
Thanks Smithers ,but you are too far my friend .I aprichiate it
Lorenzo

sector160
04-24-2015, 04:46 PM
still looking for a ca-95 frame ,I have a 150 engine , will need a title too ,the one I have I don't have the frame for...thank u larry